Specifications include, but are not limited to: This specification describes the State of New Hampshire Department of Transportation’s requirement for a heavy duty tag along trailer, minimum 12 Ton payload capacity, beaver tail deck and folding ramps. Built to Truck Trailer Manufacturer (TTMA) Guidelines. Unit shall be delivered F.O.B. Mechanical Services Garage, 33 Smokey Bear Blvd, Concord, NH 03301. Trailer Payload Capacity: Minimum 24,000 LBS. Frame: Minimum Full 10” Channel @15.3# From Front of Drawbar to Rear of Trailer. Cross Members: Full 4”, “I” Beam or “C” Channel ONLY (Non Boxed) and fully welded all the way around at each contact point(s) to prevent salt/calcium intrusion and corrosion between metals. Deck Width: 96”, With 8” Full Width Headboard. Deck Length including beaver: 25’ Including Beavertail Cleated Beavertail with Raised Wood Center. Cleated Ladder Ramps, Adjustable, Flat Fold, Dual Spring Assist with Safety Chains. Axles: Dual, Dexter minimum 24,000 Capacity, Oil Bath Bearings, with Hub-O-Meter, Suspension: Spring Type Tires/ Wheels: Nine (9) minimum E rated /10 ply Highway Tread. Hub Piloted. Spare Tire and Wheel to Match, Mounted in Carrier attached to tongue. Brakes: Electric/Self Adjusting W/Breakaway 12-volt battery. Tongue: Tool Tray with Lockable Lid, 12,000 lb. (Static Load) Heavy Duty Screw Type with Drop Foot Landing Gear, Heavy Duty Safety Chains with Slip Hooks with safety latch, Registration Holder Hitch: 3” Forged Eye, Adjustable. Deck Material: Treated Oak or Apitong. 2” Nominal Thickness and Raised