Single wide 10’ (includes any exterior mounted items) x 50’, not to exceed 53’ overall length with a maximum height of 14’ 6” (includes the curbing for the updraft blowers and boots) without the roof mounted updraft blowers attached. Unit shall be complete with all mechanical, plumbing, electrical and casework as specified herein. Typical switches shall be 20A rocker type with stainless steel or plastic cover as indicated on the plans. All case work shall meet the requirements of Scientific Equipment and Furniture Association (SEFA) standards. The lab shall meet all Federal and State safety requirements and shall be constructed to meet or exceed the following minimum loading requirements: Wind speed: VULT= 130mph Ground snow load: PG = 70psf Mapped seismic accelerations: SS = 2.40g; S1 = 0.871g Other loads as specified in the 2012 IBC