Specifications include, but are not limited to: NDOT will supply Kodiak or Idaho Norland brand machines as core exchanges. GENERAL REQUIREMENTS: COMPLIES ___YES NO ___ Elevation: Up to 12,000 feet Temperature: -50° Fahrenheit to 75° Fahrenheit. Debris Handling: Able to ingest up to 6” rocks without causing operational damage. Casting Distance: Up to 150 feet Travel Speed: Up to 35 mph Blowing Speed: Up to 35 mph Box: Cutting Height: 74” minimum Cutting Width: 108” (120” optional) COLOR: Safety Yellow. COMPLIES ___YES NO ___ CHASSIS CAB: The cab shall be a new current model cab as follows: COMPLIES ___YES NO ___ Ergonomically designed for operator comfort for 12-hour shifts. Minimum of 72” wide at the base and 80” wide at head level, 62” front to back, and 64” tall on the inside of the cab to insure sufficient room for an operator and passenger. Cab shall be mounted behind the cutting head, with discharge in front of the cab and be fully insulated with windshield installed with a 5° reverse rake minimum. Cab shall be equipped with the following: Window: Safety Glass Driver's seat: High-backed bucket with head restraint, cloth covered, air-suspension type with four-way adjustment and fore and aft isolator. Minimum of 32” of leg room for the operator as measured from the front of the seat to the dash or window (whichever is directly in front of seat). This is to insure the operator has plenty of room for driving comfortably. Passenger jump seat shall be included.