Specifications include, but are not limited to: 2.1 FRAME 2.1.1 The frame shall be constructed in a manner that provides for strength and stability for the applicator as designed by the manufacturer. 2.1.2 The frame shall have heavy duty protective coating - polyurethane enamel paint, epoxy, polyester powder coat or other approved equivalent. 2.1.3 The frame shall have any required hitch or ball assembly for being pushed by manufacturer’s recommended pusher/driver 2.2 ENGINE 2.2.1 The engine shall at minimum be a Honda GX 200cc / 6.5 hp featuring oil alert system, with keyed electric start, pull start, and a 100-watt lamp coil charging system. 2.3 PUMP ASSEMBLY 2.3.1 Shall be capable of applying a continuous supply of 98:2 MMA resin and catalyst metered for correct mixture of material to provide for material manufacturers recommended ratio for optimum material catalyzation and performance. 2.3.2 The pump shall support a minimum single tip size of .033 or two tips of .025 while maintaining a minimum of 2000 psi at the pump outlet. 2.3.3 Pump shall be designed with parts allowing for minimal maintenance and long life. 2.3.4 Pump assembly shall be easily maintained with parts readily available from the manufacturer or authorized parts dealers. 2.3.5 Pump shall draw MMA resin directly from the 5-gallon bucket in which it is shipped and received.