Specifications include, but are not limited to: 2.1 Vendor shall provide, install and adjust new commercial window treatments. 2.2 Vendor warrants that it will perform all services under this contract in a safe, efficient and lawful manner using industry accepted practices, and in full compliance with all applicable local, state, and federal laws and regulations. 2.3 Vendor shall warrant all installation, materials, supplies and service performed be consistent with the manufacturer’s specifications. 2.3.1 Lifetime limited warranty 2.3.2 Operational cords for a full 7 years from date of installation 2.4 At the completion of installation Vendor shall remove all waste materials and rubbish, as well as all tools, equipment and surplus material. 3.4 Head rail to hide the roller aluminum 3.5 Clip or track for door blinds 3.6 Right or left stainless steel chain or clutch depending on location of blind (preference of color to be determined upon award) 3.7 3% Sun control fabric and slated aluminum mini blinds 3.8 GreenGuard certified 3.9 Finished length of shades shall be no less than 6” greater than window height. 3.10 All windows shall have one roller shade per each set of windows. 3.10.1 The large conference room may need two shades. 3.11 Warranty shall be listed in the attribute section of the bid. 3.12 Window treatments shall fit windows with maximum protection from light streaks. 3.13 Finished length of shades shall be no less than 6” greater than window height. 3.14 Vendor shall do a precise measurement prior to ordering.