Specifications include, but are not limited to: MOTOR PROTECTION RELAYS 2.1 The model number for the 869 Motor Protection Replay is as such: 869-E-P5-NN-G5-H-S-N-A-N-N-G-S-P-F-B-SE-N-N-B-N 2.1.1 Application: E- Standard 2.1.2 Phase currents Slot J Bank 1/2: P5- 5A three phase current Inputs (J1) 2.1.3 Phase currents Slot K Bank 1: NN - No phase current inputs 2.1.4 Ground currents: G5- 5A ground Input (J1) 2.1.5 Power supply: H - 110 • 250 V dc/110 - 230 Vac 2.1.6 Slot B -I/O: S- 6 X RTDs (PT100, Nl100, Nl120, CU10) 2.1.7 Slot C -I/O: N- None 2.1.8 Slot F -I/O: A- 2 Form A, 3 Form C, 7 Digital Inputs (Low I High voltage, lnUExt supply) 2.1.9 Slot G- I/O: N -None 2.1.10 Slot H- I/O: N- None 2.1.11 Faceplate: G ·Front Panel 2.1.12 Current protection: S- Basic= 14, 19, 37, 38, 46, 47, 49, 50P, 50N, 50G, 50_2, 50LR, Mechanical Jam, 51P, 51N, 51G, 66, 86 • Voltage monitoring & protection: P- Advanced = Standard + 55, 59_2 2.1.13 Control: F ·Standard = Setpoint Group Control, Breaker I Contactor Control, Virtual Inputs, Trip Bus + Flex Logic, 50BF 2.1.14 Monitoring: B -Basic= Motor Health Report, Motor Learned Data, Motor 2 Start Report, Data Logger 2.1.16 Communications: SE- Standard= Front USB, 1xRS485: Modbus RTU, DNP3.0, IEC60870-5-103 + 1xEthernet Copper (Modbus TCP, DNP) 2.1.17 Advanced Communications Connector: N - None 2.1.18 Wireless communication: N -None 2.1.19 Security: B - Basic 2.1.20 Firmware Rev.: 2.30 firmware Revision 2.1.21 Quantity of five (5).