Specifications include, but are not limited to: At a minimum, all well completions will meet the standards of the Montana Board of Water Well Contractor Administrative Rules for monitoring well construction (MCA 36.21.601-660). Some requirements of the project may exceed the minimum requirements. Methods of completion not anticipated in the bidding process will be considered depending on conditions encountered and the driller’s recommendation. Any alternative completion methods must be agreed to in advance by the MBMG representative. Completion details include: Nine to eleven wells are anticipated, ranging between 20 ft to 50 ft total depth; however there is potential for total depths up to 100 feet. Wells will be completed with 4-inch PVC casing or larger. The minimum borehole diameter will be 8-inch. The PVC casing will extend to approximately 1.5 ft to 2.0 feet above ground surface and have a PVC cap or plug. A steel protective surface casing will be installed with a lockable cap.