18-2604 - Oakland Terminal Drive on Lift Replacement

New Drive on Lift:
The new drive on lift will need to be Bend Park HDS or approved equal. The contract is responsible for removing the old lift and disposing of it which includes any mechanical work that is involved.
The contractor is responsible for installing the new Lift which will also includes any mechanical installation that is needed. Also includes the installation of the new RJ – 9 Rolling Bridge Jack or approved equal. The new Bridge jack is a 9,000 LBS Capacity.
All work can be done during normal Business, unless this will interrupt everyday operations.
The contractor is responsible for cleaning up, and disposing any old equipment during the process of this job.
Specifications for the Lift:

• Lift Capacity – 18,000 LBS  / 8,165 KG
• Front Axle Max Capacity – 9,000 LBS / 4,082 KG
• Rear Axle Min Capacity – 9,000 LBS / 4,082 KG
• Overall Width - 154” / 3,912 MM
• Outside Length – 257” / 6,528 MM
• Overall Length – 297” / 7,544 MM
• Height of Columns – 93” / 2,362 MM
• Min Runway Height – 10 ½” / 267 MM
• Max Rise - 60” / 1,524 MM
• Max Lifting Height -70 1/2 “ / 1,791 MM
• Width Between Posts – 134” / 3,404 MM
• Runway Width 22” / 559 MM
• Length Between Runways  - 38” -56” / 965 MM – 1,422 MM
• Min 4 Wheel Alignment – 83” / 2,108 MM
• Max 4 Wheel Alignment – 138” / 3,505 MM
• Max 2 Wheel Alignment – 211” / 5,359 MM
• Min Wheelbase @ rated Capacity - 185” / 4,699 MM
• Min Wheelbase @ 25 % Capacity – 110” / 2,794 MM
• Locking Positions 9
• Lock Spacing – every 6” / 152 MM
• Lifting Time  - 75 Seconds
• Motor  - 220 VAC / 60 Hz / 1PH