HARRINGTON AND RIDGEWOOD PUMP STATION IMPROVEMENTS - HARRINGTON AND RIDGEWOOD PUMP STATION IMPROVEMENTS

In order to provide Clinton Township with contractors and subcontractors who will carry out the work in a timely and satisfactory manner, an approved prequalification for horizontal directional drilling and pump station rehabilitation in an existing residential or commercially developed area must be on file with the Township prior to the bid opening. The qualifications for the general contractor and all subcontractors to be used on the project will be reviewed on the basis of the proposed bidder’s past performance on work of a similar nature for Clinton Township and other owners. For this particular project, prequalification packages must be received by the Water & Sewer Division no later than 5 business days prior to the bid opening.  Contact Anderson, Eckstein & Westrick to obtain submittal requirements for all prequalification categories.
 
The Contractor shall furnish all materials, labor and equipment necessary and incidental to complete the Work as set forth in this invitation in accordance with the Charter Township of Clinton standards.  These principal items include, but are not limited to:
 
HARRINGTON PUMP STATION

1. Replacement of pump station control panel and accessories.
2. Installation of soft starts to complement existing pumps.
3. Removal of existing transfer switch, fusible switch, and generator plug.
4. Removal of any trees.
5. Installation of new generator, concrete generator pad, generator plug, and automatic transfer switch.
6. Installation of manual transfer switch and circuit breakers.
7. Installation of stone access approach.
8. Installation of conduit by means of directional drilling.
9. Control panel components shall be compatible with Clinton Township’s SCADA telemetry.
10. Other miscellaneous work-related items.
11. Restoration of all disturbed areas to include pavement, sidewalks, curbs and landscaping.
     
    RIDGEWOOD PUMP STATION

1. Replacement of pump station control panel and accessories.
2. Installation of new generator, concrete generator pad, generator plug, and automatic transfer switch.
3. Removal of any trees.
4. Control panel components shall be compatible with Clinton Township’s SCADA telemetry.
5. Other miscellaneous work-related items.
6. Restoration of all disturbed areas to include pavement, sidewalks, curbs and landscaping.