Specifications include, but are not limited to:The University of Missouri desires to replace three - Medium Voltage, dry type, open wound, transformers with vacuum cast coil transformers. The successful bidder shall make site visits to attain actual measurements and other information needed for construction of the replacement transformers, construct the new units then ship them to MU for installation by MU personnel. • Transformers shall be Dry Type Vacuum Cast Coil construction in accordance with ANSI Standard C57, latest revision. The transformer shall be constructed of individually cast primary and secondary coils, coaxially mounted. All primary and secondary coils shall be cast. • Transformers shall be operated at an altitude less than 3,300 feet above sea level. • Equipment must be new. Re-manufactured equipment will not be accepted. • Noise level of transformers shall be per IEEE/ANSI/NEMA standards and shall not exceed the levels given by NEMA TR1-1980. • Transformers shall be designed to fit existing enclosure and base frame designs. • New Vibration isolation pads shall be provided for MU installation. • Frame of transformer shall be secured to the enclosure frame. All necessary hardware shall be supplied for MU installation. • Each transformer shall include all hardware to permit connections to existing switchgear terminals, including flexible bus if necessary. • Frame of transformers shall be supplied with jacking provisions and lugs for lifting