Specifications include, but are not limited to: Manufacturer: General Partition Toilet-Enclosure Style: Overhead braced. Door, panel, screen and pilaster construction: One-piece, textured 0.060-inch fiberglass reinforced plastic facing sheets pressure laminated to core material without splices or joints in facings or cores; with laminate applied to edges before faces to seal edges and prevent laminate from being pried loose. Seal exposed core material at cutouts to protect core from moisture. oCore material: Particleboard complying with ANSI A208.1, medium density series with45pounds’minimumdensity.oDoors and panels: finished to not less than 1 inch (25mm) thick. oPilasters: Finished to not less than 1-1/4 inches (32mm) thick. Equip bottom of pilasters with ½-inch thick steel bar anchored to particle board with threaded anchors, set pins, and metal spacers. Bar to accept two threaded steel studs and leveling nuts used for anchoring pilaster to floor. Pilaster Shoes: Formed from stainless steel sheet, not less than 0.01-inch (0.79mm) nominal thickness and 3 inches (76mm) high, finished to match hardware. Brackets (fittings): Full-height (continuous), manufacturer’s standard design; aluminum. Fiberglass-reinforced Plastic color and pattern: PEWTER FR-786.