Specifications include, but are not limited to: MODEL: Minimum 20 ton, 35’ long tilt equipment trailer, Dual axle; and a deck rating of 40,000 lbs. 30’main deck length with an 8 degree load angle. WIDTH: 102 inches. WINCH: Hydraulic, 12,000 lbs. WHEELS / TIRES: (8) 6.75 x 17.5 disc pilot mounted. Tires – Minimum 16 ply, size to be specified by manufacturer to meet load rating. PLATFORM: Apitong or 1 ½” or 2” hardwood oak. Steel over wheel area. Hydraulic approach ramp. Two bolt action deck locks. APPROACH PLATE: 10’’ Knife edge ¼’’ steel approach plate. Under ride protection to meet Federal and DOT regulations. LANDING GEAR: Pin drop SUSPENSION: H-9700 spring. 50,000 lb. capacity. BRAKES: 12-1/4” x 7 ½” with S-cam air auto slack adjusters, ABS, spring brakes and outboard drums. AXLES: (2) 20,000 lb. capacity. Axles should have a minimum width of eighty six (86) inches from the outside edge of the tire tread on one side of the trailer to the outside edge of the tire tread on the opposite side. HYDRAULIC KIT: Set to run off the PTO (Wet kit not included). AIR/ELECTRICAL: ICC DOT sealed LED lights and reflector kit.