Specifications include, but are not limited to: 3.1 Shall be powered by a single phase 230-volt electric motor capable of powering all functions of the self-contained bagging plant. 3.2 Shall be supplied with 50 feet of appropriately sized/gauge power cable. 3.3 Hopper length shall be a minimum of 9 feet. 3.4 Bag fill conveyor shall be hydraulically driven and variable speed and shall run the full length of the hopper. 3.5 Bag fill conveyor shall have a minimum width of 16 inches. 3.6 The plant shall have a hydraulically driven material agitator with forward, reverse, and neutral capabilities. The agitator shall run the length of the hopper to prevent bridging of materials. 3.7 The plant shall be delivered with two, jaw-type bagging heads on capable of bagging large bags of light material and one for small bags of dense/heavy material. 3.8 The plant shall have two S-beam type load cells suspending the bagging head that weighs each bag to a selected capacity and which automatically stops the bag fill conveyor and releases the bag when the pre-selected bag fill capacity is reached. 3.9 The plant shall have a self-contained bag holder tray. 3.10 The plant shall have an adjustable height impulse type bag sealer. 3.11 The plant shall have an adjustable height roller-bed manual bag conveyor to move bags from bagging head to sealer. 3.12 The plant shall have adjustable height jacks on each corner for leveling and stabilization. 3.13 The plant shall have a 5000lb. capacity axle with appropriately sized and rated tires as well as fenders and electric brakes. 3.14 The plant shall have DOT lighting consisting of tail lights, side marker lights and turn signals.