Specifications include, but are not limited to: Supply all equipment, materials, and labor to remove and replace chain link fences to include posts and gates at 21 SLPS locations. A. Contractor shall comply in all respects with any and all applicable federal, state, and local codes, laws, regulations, and ordinances. Any fees required for permits or inspections shall be paid for by the contractor at no additional cost to the Owner. B. The final design layout of the fencing will be generated by the design-builder. C. It is the responsibility of the design-builder to survey the project site and generate all necessary drawings for approval. a. The Design-builder must submit an approved submittal list for review, inclusive of and not limited to the following: I. Design layouts II. Shop drawings indicating location of fence, gates, posts and details of installation. III. Manufacturer’s Technical Data