Specifications include, but are not limited to: Anti-Microbial Liquid Hand Soap Product must be an anti-microbial hand cleaner with strong washing power and good skin compatibility. Must clean all light dirt without the use of scrubbers and solvents. Product must prevent excessive swelling of the skin. Must maintain the skin’s natural protective acid mantel, which serves to protect it from bacterial or fungal infection. Must be a clear, viscous liquid: density (at 20C) approximate 1.03g/cm 5. Must be packaged in ready to use containers that are used in conjunction with a dispenser or be able to be poured into a dispenser. Product will be unscented or lightly scented. All-Purpose Cleaner (for floor cleaning and spray applications) To be used with manual and/or machine cleaning methods. To be a low sudsing, easy to rinse detergent. Product to be biodegradable and make a clear, soluble solution, which leaves no film or residue and does not stain or discolor when used at recommended proportions. Product must dilute in hard or soft water. Chemical composition: Blend of mixed liquid ammonium chlorides. Portion packed in easy to handle packaging. Sanitizer (quaternary solution - no chlorine) Concentrated liquid blend of quaternary ammonium compounds. Must be EPA registered. Product to be biodegradable and must dilute in hard or soft water. Provide active quaternary sanitizer equivalent to 50ppm available chlorine. Chemical composition: Blend of mixed liquid quaternary ammonium chlorides. Portion packed in easy to handle packaging. Multi-Purpose Degreaser (for degreasing floors and spray applications) To be used for heavy-duty cleaning, degreasing of floors, food and nutrition equipment and other difficult-to-clean surfaces. Product to be biodegradable and must dilute in hard or soft water. Chemical composition: Blend of mixed liquid quaternary ammonium chlorides. Must be portion-packed in easy to handle packaging.