Specifications include, but are not limited to: MSD is requesting quotes for 13 custom van interiors. In addition to the items on the drawings the following items are to be included: • 4-ECCO #3703A strobe lights. No substitutions. Two to be mounted at the front of the van and two to be mounted at the rear. Final location to be agreed upon by MSD prior to being installed. All lights to be controlled by a single dash mounted, lighted, labeled rocker switch. • 1-Jotto Laptop Desk #425-5626 installed at the passenger’s seat. No substitutions. • 3-3” clear rectangular LED interior lights, Byers PN #1492139 or approved equal installed in the rear of the van. Final location to be agreed upon by MSD prior to being installed. Lights to be wired to the factory door switches. • 1-Weather Guard 7-1/2” Cab Command Center between the seats. PN #9010-3-01. No substitutions. • 1-1000 watt pure sine wave inverter. Translectric PN #GP-ISW1000-12 or approved equal. Inverter to be wired to the “on” side of the ignition switch. Final location to be agreed upon by MSD prior to being installed. • 1-Inverter remote. Translectric PN #GP-ISW-R-12 or approved equal. Final location to be agreed upon by MSD prior to being installed.