Specifications include, but are not limited to: a. A fully enclosed one-quarter inch (1/4”) thick cast aluminum cabinet with a stainless steel front and two locks per the following specifications. 1) The cabinet shall have pin hinges so the front can be opened on hinges and removed completely. 2) All exposed corners on the exterior shall be rounded or blunt. 3) The cabinet shall be wall mountable with six (6) mounting holes on the back panel. Each mounting hole shall be three-eighths inch (3/8”) in diameter. All electric and data connections shall enter through the back or the bottom of the cabinet. 4) The cabinet shall have two (2) vent holes in front and two (2) vent holes in the rear with intake cooling fans mounted on the rear vent holes. There shall be a recess channel on the rear to allow for air intake when mounted on the wall. 5) The cabinet shall have a surge protector firmly mounted inside with a minimum of seven (7) outlets and a cord length of four feet (4’) to six feet (6’). 6) The cabinet shall be designed to properly mount and use the touchscreen monitor specified herein. 7) The cabinet shall have space to store a mini keyboard. 8) The cabinet shall have space for a receipt printer, credit/debit card reader, and speakers for future applications.