Specifications include, but are not limited to: STANDARD DESIGN: Outboard Motor Style 2018 OR NEWER MODEL YEAR HULL MATERIAL: 0.100 gauge, marine grade aluminum bottom and sides. CONSTRUCTION: Alweld HULL DESIGN: Flat Bottom BOW DESIGN: Modified-V; LENGTH: Minimum 15’ and 16’ Maximum BEAM WIDTH: Minimum 48” BOTTOM WIDTH: Minimum 48” inside floor width. TRANSOM HEIGHT: 16” SIDE HEIGHT: Minimum 24” from floor of boat to top of the sides. TRANSOM: Minimum 16” and designed to support a 23-27HP Vanguard Marine Outboard Motor. FRONT DECK: Open Bow Design with a two (2) foot deck. FUEL TANK: Portable 6 Gallon FLOOR: Flat, diamond plate aluminum floor and bow liner. CONSOLE: None SEATS: One (1) removable pedestal seat at the rear, one (1) removable pedestal seat in the center, and one (1) removable pedestal seat in the front. STORAGE: Two (2) 10’ side storage boxes with door seal and compression locks. MOTOR RATING: 23-27HP Vanguard Marine Outboard. DRAIN PLUGS: Standard to manufactures specifications. TIE DOWN RING: Heavy-duty and 1 center bow mounted. GRAB HANDLES: Mounted on the front and rear on both sides. ICE BREAKERS: Welded on both sides of the boat. PAINT COLOR: Inside: Camouflage Paint Outside: Camouflage Paint NAVIGATION LIGHTS: Must meet Coast Guard requirements. ACCESSORIES: 1. Automatic bilge pump with switch. 2. Rear Flotation Pods on each side of the boat. 3. Removable rear standup bar for the driver. PARTS: The boat must be equipped with all necessary parts for easy mounting and operation. COAST GUARD REQUIREMENTS: Must meet level flotation standards.