Specifications include, but are not limited to: 1. Engine Yes No Actual a. 6 cylinder Turbocharged, diesel, wet sleeve engine must be 2020 compliant b. Direct Fuel Injection c. 270 hp minimum d. Minimum 400 cu in engine e. 800 ft/lbs. torque minimum f. Spin-on oil & fuel filters g. Heavy duty cooling system filled with manufacturer’s approved antifreeze solution that provides protection to at least –30 degrees F h. 110 Volt block heater i. Dry type air cleaner with restriction indicator j. Radiator bug/rock screen k. Adjustable throttle control 2. Transmission a. Allison 3000 series, or equivalent, 5 speed automatic transmission with transmission oil cooler and Muncie or Chelsea air shift PTO b. Magnetic drain plug c. Push button shift on dash 3. Front Axles a. 12,000 pounds front axles 4. Rear Axles a. 30,000 pounds Rear axles b. Automatic lock, no-spin rear axle 5. Frame a. Double frame b. Members to be rated not less than 1,500,000 RBM c. Heavy duty, full width, steel front bumper d. Front tow hooks or eyes (2) e. Approximate 168” cab to axle length