Specifications include, but are not limited to: The purpose of these specifications is to set forth minimum requirements for a commercially produced accessible Class A, steel cage, low floor, commercial bus designed for use in transit applications, meeting FTA (Federal Transit Administration) and ADA (Americans with Disabilities Act) standards and regulations, capable of seating a minimum of 16 ambulatory forward-facing passengers, with a minimum GVWR (Gross Vehicle Weight Rating) of 14,200 pounds. Vehicle shall be equipped to accommodate five wheelchair positions. Foldaway seats shall be used throughout the bus to allow the most flexibility between wheelchairs and ambulatory passenger seating. Vehicle shall be fully tested at the Pennsylvania State bus testing facility in Altoona, Pennsylvania according to the applicable FTA minimum service life requirement.