Specifications include, but are not limited to: • A rubber tracked skid steer (80 min. gross engine horse power rating) equipped with a rotary cutting head capable of mowing/cutting grass, brush or small trees up to 4” diameter breast height is preferred but a tractor with rotary motor would also be acceptable as long as it can fit through gates and around narrow corners. • Mow trails to a minimum width of 8 feet or wider in specific areas as directed by project supervisor. • Minimum mowing height to 4 inches or less of ground surface. Rotary mower is required, tracked mower recommended. • Remove ALL deadfalls and branches greater than 4 inches in diameter from the trail surface and discard adjacent to but off the trail corridor that is being mowed. This may require occasional use of a chainsaw. Some trails may require more deadfall removal than others. • Most sites have a few rocks at ground level. Rocky protrusions are present on many job sites – Site visit previous to bidding is highly recommended. We will attempt to flag rocks prior to contract but cannot guarantee they will be marked.