Specifications include, but are not limited to: 1.0 Tank 1.1 The tank is to be 5600 gallon double conical stainless steel single compartment tank. The tank is to have a thirty (30) inch drop with at straight top. Both ends of the conical tank are to be the same size and shape. The support rings/ribs are to be on the outside of the tank and be continuously welded 1.2 The shell of the tank to be made of twelve (12) gauge minimum T304 stainless steel. 1.3 The head of the tank to be made of ten (10) gauge minimum T304 stainless steel. 1.4 The tank is to have two (2) baffles equality spaced from the ends and each other. Baffles are to be made so the contents can completely drain at the center of the trailer. Baffles to have holes at the three (3), six (6), nine (9), and twelve (12) o’clock positions. Baffles to have a manway in the center. 1.5 The tank must have a manhole in the top that is a minimum of twenty (20) inches in diameter and the hinges in front so the door will close to the rear. 1.6 The Long members and Bolsters are to be made from stainless steel. 1.7 There must be two (2) three (3) inch threaded nozzles in the tank on top centerline between the baffles and head seams. They both shall have solid caps and sash chains. 1.8 All inlet and outlets must have Teflon gaskets on flanged connections and provisions for seals. All caps shall have plastic coated cables. 1.9 There must be a four (4) inch sump made from stainless steel at the lowest point of the tank. 1.10 There must be one (1) four (4) inch pipe with an elbow and extension going to the curbside of the trailer. 1.11 There must be one (1) four (4) inch Betts #WD400ALB butterfly valve on each outlet. 1.12 There must be four (4) inch stainless steel cam style adapters and dust caps on each outlet. 1.13 The tank must have a pressure/ vacuum relief vent 1.14 The tank must have a spill dam around the manhole. The top of the tank can be the floor of the spill dam. The spill dam must have two (2) one and a half (1.5) inch drain hoses. The spill dam must have a twelve (12) inch wide walkway on the curbside of the spill dam. The walkway can be aluminum diamond plate type.