Specifications include, but are not limited to: This Request for Proposal (RFP) describes a relationship to be established between the State and a responder to provide elevator/escalator maintenance services, inspections and testing, and repairs on an as needed basis throughout the State. Service locations include, but are not limited to, government office buildings, secure correctional facilities and hospitals, schools, etc. Hydraulic Elevators: Contractor shall regularly and systematically examine, adjust and lubricate as required, and if conditions warrant, repair or replace: pump unit, motor, muffler and controller pars, valves, valve magnet coils, valve motors, packing, windings, rotating elements, contacts, coils, resistance for operating and motor circuits, magnet frames, hydraulic oil and all other electrical and mechanical parts except items listed below in the exclusions for hydraulic elevator maintenance: Motor: including motor windings, bearings, rotating elements, commutators, brushes and brush holders; Controller: including relays, resistors, contacts, coils, leads, transformers, timing devices and solid state components; Dispatching Equipment: including relays, resistors, contacts, coils, leads, transformers, timing devices and solid state components; Selector: including electrical or mechanical drive components, cams, contacts, relays, resistors, leads and transformers; Car: including power door operator, door protective devices, car door hangers, car door contacts, load weighing equipment, car safety devices, car guide shoes including roller guides. Hoistway: including deflector sheave, secondary sheaves, buffers, governor tension assemblies, guide rails, limit switches, compensating sheave assemblies, compensating chain or cables, traveling cables, hoistway and machine room wiring, hoistway door interlocks, hoistway door hangers and gibs and auxiliary closer; Accessory Equipment: including all accessory equipment