Specifications include, but are not limited to: SANDBLASTING AND REFINISHIG OF 12’ DUMP BODIES, OFF OF SINGLE AXLE PLOW TRUCKS – 12’ Long, 8’ Wide, 63” Front Panel with 18” Cab Shield, 29” Sides, and 35” Rear Corner Posts. NO TAILGATE. We have several bodies that need refinishing, our intent would be to remove the tarp assembly, all lights and wiring, etc.. Make any necessary welding repairs and remove the box from the truck for placement onto your trailer or transport truck. We are not concerned with pitting or dent repair etc., just clean paint, no rust. 1) Each Sandblast exterior and underside of dump including inside rear corner posts. 2) Each Prepare surfaces for and refinish outside of dump and inside of bed walls to 1’ coverage on floor using a zinc base coating, 2 coats of epoxy primer and Omaha Orange single stage, 2 component, polyurethane. 3) Each Refinish underside of dump in a zinc base coating and Amteco products Zero Rust direct to metal flat black paint with a 2000+ hour salt spray rating. OR EQUAL 4) Each Transport to and from customer/City of Saginaw for swap. 5) Each Example time and material cost for a 5” x 12” patch repair.