Specifications include, but are not limited to: 1.1 Worm gear, thrust drive sheave, drive sheave shaft bearings, brake pulley, brake coil, brake contact, linings and component parts, motor, motor generator, motor windings, rotating element, commutator, brushes, brush holder and bearings. 1.2 Controller, selector and dispatching equipment, all relays, solid state components, resistors, condensers, transformers, contacts, leads, dashpots, timing devices, computer devices, steel selector tape and mechanical and electrical driving devices. 1.3 Governor, governor sheave and shaft assembly, bearings, contacts and governor jaws. 1.4 Deflector or secondary sheave, bearings, car and counterweight buffers, car and counterweight guide rails, top and bottom limit switches, governor tension sheave assembly, compensating sheave assembly, counterweight and counterweight guide shoes including rollers and gibs. 1.5 Hoistway door interlocks, hoistway door hangers, bottom door guides and auxiliary closing devices. 1.6 Automatic power operated door operator, car door hanger, car door contact, door protective device, load weighing equipment, car frame, car safety mechanism, platform wood flooring tile floor covering in the elevator car, elevator guide shoes, gibs or rollers. 1.7 Renew all ropes when necessary to ensure adequate factor of safety. 1.8 Repair or renew conductor cables when necessary. 1.9 Renew guide shoes, gibs or rollers as necessary to insure smooth and quiet operation. 1.10 Lubricate all guide rails properly except when roller guides are used.