Specifications include, but are not limited to: a. For routine cleaning, all floors are to be thoroughly cleaned, including under all easily moveable objects such as chairs, waste receptacles, floor mats, etc. After cleaning, replace all items moved. b. Moved objects are not be stacked on desks, tables or window sills, nor used in place of a step ladder, etc. ; a. All carpets and rugs shall be clean, free of spots, gum, crusted material, spillage, and removable stains. There shall be no evidence of fuzzing caused by harsh rubbing or brushing of carpet. ; a. Remove all moveable items and thoroughly vacuum area to be cleaned. Cleaning can be done by steam cleaning or agitation. b. Pre-treat carpet with approved chemical at approved dilution. Solution must be applied so fibers remain damp until cleaned. Chemical should remain on carpet 10 – 15 minutes before beginning steam cleaning. ; a. Sweep floor and remove visible dirt and debris, gum, tar or foreign substances from floor surface. b. Scrub floor with approved chemicals at proper dilution. Mop head must be thoroughly wet with solution during mopping / scrubbing process. c. Rinse with clean water. d. Apply approved floor shine product unless cleaning solution contains floor shine ; a. Remove all cobwebs. b. Spot clean walls. c. Clean and polish entrance glass and pass-through glass at reception area, and security desk. d. Clean and polish any glass panels or door glass in entries, lobbies, cubicles, in or next to office or conference room doors. Remove all handprints, smudges and soil. If necessary, clean the entire door or window to accomplish this task. ; a. Waste containers in general office space must be emptied during each regular service day. b. Waste containers in restrooms, break rooms and conference rooms must be inspected daily and changed as needed. c. Empty waste receptacles into plastic bags, tie off and remove to designated location.