Specifications include, but are not limited to: 1.Lightly power wash the existing roof system to remove dirt and debris. 2.Allow existing roof membrane to dry. 3.Inspect existing roof system for high fasteners. Remove and replace any high fasteners. 4.Inspect all existing caulk areas. Apply new caulk as required. 5.Inspect existing roof membrane for cracks. Apply Duro Shield brush grade mastic to all membrane cracks. 6.Inspect existing perimeter edge metal for any loose fascia and secure as needed. 7.Mask or otherwise protect all surfaces not to be coated. 8.Apply Duro Shield 2 part epoxy primer to any areas of the roof surface that have ponding water at a rate of 350 sq ft per gallon 9.Apply the Duro-Shield Silicone coating at a rate of 1.5 gallons per 100 sq ft. Duro Shield Coating may be applied by brush or airless sprayer. Minimum cured thickness is to be 23 mills. 10.After roof coating is cured, remove all masking and completely remove all job related debris 11.Provide a 10 year manufacturers warranty.