Specifications include, but are not limited to: 1. Removal of deteriorated materials to be replaced 2. Preparation of existing surfaces to have new materials placed on, in or next to them 3. Block and brick laying that shall match existing coursing 4. Using the proper mortar for the particular job application 5. Do masonry and block work level and plumb 6. Build block and masonry to accommodate pipe, duct or other required openings to industry standards including cutting of masonry or block to provide a continuous pattern. Cut edges shall be concealed 7. Preparation of steel lintels prior to installation with rust inhibiting finishes 8. Installation of steel and precast concrete lintels, 9. Installation of ties and anchors 10. Installation of embedded flashing at wall bases or above openings at lintels