Specifications include, but are not limited to: Bid Item 1: Water Works & Brass Accessories All Water Works Brass fittings shall be free of lead. The vendor shall supply the Public Works Department with the lead content of the fittings, which must conform to AWWA Standard C-800 (or latest revision), and the pack joint end connections shall consist of a Buna-N beveled gasket for watertight seal. All rubber IFB 20DPW088G 14 gasket and O-ring seals shall be chloramines resistant. An independent, split-clamp locking device or stainless steel beveled gripper shall be incorporated in the design for additional restraint. All packed joint connections are to be without a set screw. Bid Item 2: Bolted Repair Sleeves for ¾”-2” Iron Pipe/PE Tubing The coupling shall have a steel sleeve made of carbon steel with a minimum yield of 30,000 PSI. The flanges shall be made of ductile iron per ASTM A536. Coupling must be Fusion-Bonded Epoxy Coated to prevent corrosion, and have corrosion-resistant alloy bolts and nuts