Specifications include, but are not limited to: a) Bidder shall provide calibration services consistent with good metrology practices in compliance with the standards enunciated by ANSI/NCSL. b) The total number of in house calibrations is projected to be approximately 2500 per year, with an approximate expected growth rate of 100 calibrations per year. c) The following schedule is expected: 40 hours M-F 7:30 – 4:00 with a ½ hour lunch break and two 15 minute breaks. Technician must obtain prior approval from immediate supervisor or designee if there is to be a deviation from the expected schedule. Technicians will document work hours on the appropriate contractor timesheet and turn them in to the Metrology supervisor at the end of each workweek. d) MBL will provide training on several primary internal SOP’(listed in Section 6.b). Additional training on individual calibration SOP’s will occur as required. There are approximately 310 calibration SOPs.