Specifications include, but are not limited to: 1. Provide and install a new 12,000-gallon underground storage tank system, consisting of (2) 6,000-gallon tanks, with all necessary counter buoyancy deadmen anchors and straps as well as all required excavation and backfill material. 2. Provide and install a new 24” inside diameter, 11-foot, 6-inches deep high density polyethylene wet well with intake pipe from the storage tank. 3. Provide and install a new prefabricated pump system with enclosure and all necessary controls placed on a new reinforced concrete slab, located next to the storage tanks. 4. Provide and install a new submersible well pump, placed 400 feet below ground surface in an existing 8-inch irrigation well. Well pump installation shall include all necessary wiring, piping and well accessories to properly install new pump in well.