Specifications include, but are not limited to: The project consists of the removal of (2) Layers of the old roofing down to the sheathing, (approximately 105 sq.), also the old roof vents and drip edge, and dispose of properly. Inspect the sheathing, to make sure there is no rotten sheathing or fascia trim. Then, cut the sheathing along the top to allow for new ridge vent. Repair holes in sheathing from the old vents to allow a secure surface for roofing material to be installed. The roof will then be re-roofed with 2 rows, (6 feet), all rakes, hips and valleys will be fully covered and flashed according to manufacturer's specifications with Grace Ice and Water or equal, white 8" drip edge and a 30-year Architectural shingles. Also, the existing gutters will be removed and replaced with metal seamless, (white) gutters. All main buildings that have front and rear entrance roof will also be stripped and re-roofed per specifications. Sheds will be reroofed in the same process and drip edge installed along all edges.