Specifications include, but are not limited to: A. The City of Baltimore desires to procure services to perform Upgrades, Updates, Maintenance & Repair Services for AMAG ID security and associated equipment, at the Baltimore City Police Department locations. B. All material furnished under this contract shall be new and unused. C. The material and services shall conform to all current Federal, State and Local Safety Codes and Standards. D. This is a requirements type contract; services are to be provided on an, “as needed basis”. 1. Routine inspections, testing calibration and instrumentation. 2. Selected contractor shall be able to read and understand diagrams,schematics and have the ability to direct and perform emergency repairs as required. 3. Provide and replace all defective parts. 4. Maintain a log of routine maintenance and repairs Routine maintenance shall include all repairs, adjustments and components replacement to maintain the equipment in normal operating conditions in accordance with manufacturer’s specifications. 1. Upon notification by the City the contractor shall repair and return to service any and all inoperable equipment as quickly as possible. 2. The contractor shall replace all defective or worn parts when such replacement is required to maintain proper operation. All parts used for replacement will be of the manufacturer's exact replacement type or equivalent to maintain uniformity. 3. The contractor shall maintain spare parts complement of all equipment included in this Bid.