Specifications include, but are not limited to: 3.2.1.1 Badge, A57DE or equal: Rhodium finish with red or blue enamel panels, custom die struck with: PRINCE GEORGE’S COUNTY panel, pin and safety catch, interior center circle to hold proper badge centers. Centers to be affixed with 60/40 solid solder. Material, 14 gauge (.064 thickness) 85/15 metal. Custom die struck design centers as follows: a. Round, 15-7/8” diameter, rhodium finish, 14 gauge metal, and rope edge. Hard enamel black background on top to read: FIRE FIGHTER. Prince George’s County Seal centered below panel with red enamel border. Red, blue and white enamel crest. b. Same as Item a. except, black enamel panel to read: FIRE TECHNICIAN. c. Same as Item a. except, black enamel panel to read: PARAMEDIC. d. Same as item a. except, black enamel panel to read: FF/MEDIC 3.2.1.2 Badge, A57DE or equal: Rhodium finish with red or blue enamel panels, screw back with interior circle to hold proper badge centers. Centers to be affixed with 60/40 solid solder. Material,14 gauge (.064 thickness) 85/15 metal. Custom die struck designs, same as Item 1, a through d. 3.2.1.3 Badge, A57DE or equal: Same as item 1, a through f except Rhodium finish plate added above PRINCE GEORGE’S on top of badge that reads, “RETIRED.” 3.2.1.4 Badge, A57DE or equal: Same as item 2 except Rhodium finish plate added above PRINCE GEORGE’S on top of badge that reads, “RETIRED.”