Specifications include, but are not limited to: 3.4 DIMENSIONS 3.4.1 Non-CDL required vehicle, estimated GVWR- 26,000 lbs. 3.4.2 Usable CA shall be approximately110"-112" to accommodate body and compressor platform. 3.5 BRAKE SYSTEM Four (4)-wheel disc with four (4)-channel ABS 3.6 ENGINE and EQUIPMENT 3.6.1 Diesel, minimum requirements: 250 HP @, 2300 RPM, 660 lbs. Gross torque@ 1200 RPM 3.6.2 Engine shall meet the most current EPA/GHG14 emission standards. An official Certificate of Conformity issued by the EPA shall be provided with the Bid Response. The certificate level (CERT) shall demonstrate that the engine is at or below the emissions cap (STD). There are no exceptions to this requirement. Anne Arundel County will not accept any engine that fails to meet the emissions limits and standards listed above. Any bid submission that does not include the required stated emissions documentation, may be considered non-responsive and out of specification. 3.6.3 Fuel tank, minimum forty (40) US gallon) minimum mounted so as not to interfere with the body up fitter requirements. 3.6.4 Engine block heater, minimum 600 watt/115 volts, with receptacle (minimum) 3.6.5 Alternator, 150 amp (minimum) 3.6.6 Dual batteries, 1850 CCA (minimum) 3.6.7 Automatic engine shutdown and alarm for low/high oil pressure or high coolant temperature 3.7 TRANSMISSION and EQUIPMENT 3.7.1 Automatic 5-speed, approximate 660 lb. ft. torque rating 3.7.2 Auxiliary Transmission oil cooler (air to oil) and filter 3.7.3 Transmission temperature gauge 3.8 FRONT AXLE and EQUIPMENT 3.8.1 Front axle capacity approximately 8,000 lbs. with 8,000 lbs. minimum taper leaf spring 3.8.2 Shock absorbers, right and left side, heavy duty 3.8.3 Power steering