Specifications include, but are not limited to: 2.1 Carpet (Colored Red on Flooring Plan in Attachment 9) and Walk off Carpet Area (Colored Blue on Flooring Plan in Attachment 9): 2.1.1 Remove and legally dispose of existing carpet in the specified area. 2.1.2 Prepare specified area as needed for installation of new carpet. 2.1.3 Contractor shall use manufacturer recommended adhesive and all other materials to perform the work. 2.1.4 Carpet must be installed with new adhesive. 2.1.5 All products shall be new and unused. Seconds or flawed materials are unacceptable. 2.1.6 Existing Rubber cove base to remain in place. 2.1.7 Contractor to purchase the following carpet and install: 2.1.7.1 Mohawk, Flamestitch III / GT168 Color: 882 Bergello 2.1.7.2 Additional carpet (4 boxes) shall be provided in the same color dye/lot as the installed to ensure sufficient quantities for future individual tile replacement. 2.1.7.3 Mohawk, Tuff Stuff II Collection / Step In Style II Color: 955 Cobalt 2.1.7.4 Additional Walk off Carpet (4 boxes) shall be provided in the same color dye/lot as the installed to ensure sufficient quantities for future individual tile replacement. 2.2 LVT Area (Colored Green on Flooring Plan in Attachment 9): 2.2.1 Remove and legally dispose of existing flooring in the specified area. 2.2.2 Prepare specified area as needed for installation of new flooring. 2.2.3 Contractor shall use manufacturer adhesive and all other materials to perform the work. 2.2.4 LVT is to be installed glued in entirety with new pressure sensitive adhesive not free floating. 2.2.5 Existing Rubber cove base to remain in place. 2.2.6 Contractor to purchase the following LVT and install: 2.2.6.1 Mohawk, Hot & Heavy Collection Secoya C0009 Color: 936 Converse Basin 2.2.6.2 Additional LVT (10 boxes) shall be provided in the same color dye/lot as the installed to ensure sufficient quantities for future individual tile replacement.