Specifications include, but are not limited to: Mullikin Transportation Site (Phase 2) - 11050 Mount Oak Road, Bowie, MD 20716 1. Prepare a master plan of the Mullikin site that addresses the requirements in the PGCPS School Bus Maintenance Facility Specifications (see Appendix 1). The master plan should include at a minimum parking and access lanes, location of administrative offices and bus depot buildings, fuel station, storm water management, fencing and lighting, and a grading plan if required. 2. Prepare concept design thru construction documents for the Administration Building and Driver Depot using the 150 bus prototype specification. 3. Prepare concept design thru construction documents for a new fueling hut per the PGCPS prototype specification 4. Recommend location and requirements for two new bus wash bays. 5. Work with PGCPS Division of Information Technology to ensure that the campus has the most up-to-date communications and security capability. 6. Recommend location for a second 10,000 gallon gas tank. 7. The architect will meet with a planning committee during the design process to refine and validate the project requirements. Greenbelt Transportation Site - 6350 Greenbelt Road, Greenbelt, MD 20770 1. Prepare a master plan of the Greenbelt site that addresses the requirements in the PGCPS School Bus Maintenance Facility Specifications (see Appendix 1). The master plan should include at a minimum parking and access lanes, location of administrative offices and bus depot buildings, fuel station, storm water management, utilities, fencing and lighting, and a grading plan if required. 2. Prepare concept design thru construction documents for the Maintenance Garage, Administration Building and Driver Depot, and fueling station using the PGCPS prototype specification. 3. Work with PGCPS Division of Information Technology to ensure that the campus has the most up-to-date communications and security capability. 4. The architect will meet with a planning committee during the design process to refine and validate the project requirements.