Specifications include, but are not limited to: Any troubleshooting work will be done using labor and equipment rates quoted by Contractor and shall consist of the following types of operations: (Including but not limited to) Replace fuse at base of pole. Replace fuse kit at base of pole. Replace line or neutral connector kit. Replace twin wire inside pole, bypass hand switch at top of pole. Replace wiring within inter-luminaire conduit or weather-tite flexible armoured conduit. Replace inter-luminaire weather-tite flexible armoured conduit, wiring and fittings. Replace above ground fuse. Replace bulb. Replace luminaire. Replace luminaire glassware. Replace loose connection. Remove defective fixture only. Install fixture only (old unit removed previously). Replace street light poles. Replace fixtures. Replace bases. Locating and repairing (including splicing) of underground electric street light cables. Replace equipment control and service entrance equipment. Maintenance of vegetation around lighting components Write daily report of work accomplished.