Specifications include, but are not limited to: 15.1 The successful bidder will furnish the LED post top street light fixtures. County and/or BGE contractors will provide installation services. 15.1.1 Prior to contract award, the fixture and corresponding specifications and material data below will be submitted to Baltimore Gas and Electric (BGE) for review and approval. • Illuminating Engineering Society of North America (IESNA) LM-79/LM-80 forms • American National Standards Institute (ANSI) compliance standards • Underwriter Laboratories (UL) compliance standards • Institute of Electrical and Electronic Engineers (IEEE) compliance standards • Compliance, Standards, Accountability (CSA) Group compliance standards 15.2 Deliveries will be made to Howard County at a location yet to be determined. The successful bidder can expect to deliver approximately 200-250 fixtures per month. Monthly delivery charges will not be paid and shall be considered incidental to the Bid Item. 15.3 The following Lumen output is required for each fixture (please see Appendices A and B for illustrations of each fixture type): • TYPE 1 Post Top Street Light Fixture: 3,400 Lumens – 4,600 Lumens • TYPE 2 Post Top Street Light Fixture: 4,400 Lumens – 6,000 Lumens • TYPE A Post Top Street Light Fixture: 3,800 Lumens – 5,700 Lumens • TYPE B Post Top Street Light Fixture: 6,400 Lumens – 8,300 Lumens A photometric analysis will be required as follows: • IESNA – Type 3 light distribution pattern for a fixture mounted at 14 FT using a standard 25 FT grid. 15.4 The fixture base must easily attach to a standard 14’ fiberglass, steel, or aluminum pole approximately 3” in diameter.