Specifications include, but are not limited to: 2.0 MATERIALS 2.1 Test Bench System: Test Bench System that can test up to ten (10) five eighths inch (5/8”) x three fourth inch (3/4") meter at a time, or up to ten (10) one inch (1”) meter at a time, or up to five (5) one half inch (1-1/2”) to two inch (2”) meters at a time or one (1) three inch (3”) meter at a time and include the following features: 2.1.1 Measurement Tanks 2.1.1.1 Low Flow: Ten (10) Gallon and one hundred (100) Gallon Calibrated Stainless Steel Duplex Tank with scale. 2.1.1.2 High Flow: Five hundred (500) Gallon Stainless Street Calibrated Tank with Deck Scale. 2.1.1.3 Ten (10) Gallon Stainless Steel Calibrated Duplex Tank with High Resolution Scale for C715. 2.1.1.4 Stainless steel construction. 2.1.2 Flow Measurement: Precision rotometers that cover a flow range from >0.1 – 160 gpm. 2.1.3 Meter Clamping: Standard meter adapters, meter and adapter gaskets, manual flow control valves, document station, electric actuated clamping device, carrier bars and spacer spools and all other necessary appurtenances. 2.1.4 Test Bench Frame shall be fabricated steel with polyester coating for corrosion protection. 2.1.5 Control Panels: 2.1.5.1 NEMA four (4) or twelve (12) enclosure 2.1.5.2 Enamel Finish