Specifications include, but are not limited to: Backhoe/Loader Horsepower not less than 90hp and not more than 105hp. Operating weight not less than 16,000 pounds and not more than 20,000 pounds. Backhoe must have a minimum digging depth of 14’ Backhoe/loaders will be no older than (3) three years nor have more than 1600 hours at time of initial delivery. Four wheel drive required. Dump clearance at 45º bucket angle minimum 8’6”. Backhoes must come equipped with pilot controls with pattern select. Backhoe/loaders in Region 3 must come equipped with a ride control system. Buckets must come with a quick change digging bucket, minimum of 24” and a maximum of 28” with teeth and front bucket minimum capacity 1.3 cubic yard. Buckets must have OSHA approved Lift hook, three (3) 3000 lb. rated lifting hooks furnished on the top of the front bucket one on each end and one in the middle. Each machine must come with an extendable dipperstick digging depth up to 17’. Wheeled Loader Horsepower not less than 74hp and not more than 100hp Operating weight not less than 12,000 pounds and not more than 15,000 pounds. Loaders will be no older than three (3) years and have more than 1600 hours at the time of initial delivery Front bucket must have minimum capacity 1.0 cubic yards. Four-wheel drive required. Loaders must be articulating. Dump clearance at 45º bucket angle minimum 8’ Bucket must come with a bolt on cutting edge. Bucket must have OSHA approved Lift hook or Lift loop furnished on front bucket Loaders must have air conditioning, strobe light and number plate bracket. Wheeled Loader Horsepower not less than 125hp Operating weight not less than 23,000 pounds and not more than 28,000 pounds. The Loaders will be no older than (3) three years and have more than 1600 hours at the time of initial delivery. In Regions 1 & 4, front bucket shall have a minimum capacity 2.5 cubic yards. In Region 2, front bucket shall have a minimum capacity of 2 cubic yards and a maximum capacity of 2.5 cubic yards. Bucket must come with a bolt on cutting edge. Buckets must have OSHA approved Lift hook or Lift loop furnished on front bucket Four-wheel drive required. Loaders must be articulating. Dump clearance at 45º bucket angle minimum 8’6”. Loaders requiring forks must come with quick coupler loader forks 60‘. Loaders must have air conditioning, strobe light and number plate bracket.