Specifications include, but are not limited to: 1.1 Remove existing lift. 1.2 Remove existing body and boom rest. 1.3 Remove existing mounting structure. 1.4 Remove existing tail shelf as one piece. 1.5 Remove existing torsion bars. 1.6 Remove the forward set of Strobe lights and plug holes, remove rear set of strobes and paint boxes with body 2.1 Reinstall existing mounting structure using all new hardware. 2.2 Reinstall existing body and boom rest using all new hardware. 2.3 Reinstall existing lift using all new mounting bolts. 2.4 Reinstall existing tail shelf. 2.5 Reuse existing torsion bar, if possible. 2.6 Upgrade trailer shall to a class V, rated up to 16,000 lbs. gross trailer weight, with 2 square receiving opening. 7-prong Round pin trailer plug-in ; 2.8 Install all new manufacture operation and safety decals on bucket system. 2.9 Install new PTO, hydraulic pump along with all new hydraulic hoses on all components. 2.10 Install all new wiring from the chassis to the lift. 2.11 Install remote start/stop into the chassis wiring. 2.12 Inspect and adjust all compartment doors.