Specifications include, but are not limited to: o Must be a new unit model year 2019, 2020 or 2021 Your Unit: o Unit shall have a minimum SAE operating weight of 23,000 lbs. Your Unit: o Maximum counterweight at rear of unit Your Unit: o Z-bar linkage system with “bucket float” and “auto return to dig” modes. o Auxiliary hydraulic lines to be plumbed to the boom cross tube. o Hydraulic tank sight gage. o Unit shall be supplied with counterweights and center rear pin connector for towing. o Engine to be a 4 cylinder diesel with turbocharger. o The unit shall have a minimum Horsepower of 130 HP. Your Unit: o Tier 4. o Direct injection. o 110V Engine block heater. Your Unit: o Cold start aid. o Diesel liquid exhaust system. o Automatic shutoff for engine protection in case of low oil pressure. ; o Minimum 50 gallon fuel tank Your Unit: o 4-speed forward and 3-speed reverse transmission, not hydrostatic drive o 4-wheel drive o Differential lock/limited slip on front and conventional rear. o Single petal foot throttle o Heavy duty inboard or outboard planetary ; o The unit shall have 17.5 x 25 radial mud and snow rated tires, Michelin brand only o Rear tires to be loaded with Rim Guard (beet juice) weight o Unit must have factory assembled rims and tires, not aftermarket o 12 / 24 volt electrical system with minimum 2 each heavy duty 800CCA maintenance free batteries. ; Cab Specs o Cab shall be a sound suppressed R.O.P.S. cab that meets all applicable Federal, State and OSAH regulatory requirements. o Dash instruments shall include: o Tachometer o Speedometer o Oil Temperature o Oil Pressure o Water Temperature o Amp Meter o Fuel Gage o 12 volt in-cab plug in adaptor auxiliary power outlet o USB outlet, 2.0 amp minimum. ; Snow Plow o 12’ Avalanche model 500 with floating receiver o 44” tall o JRB coupler installed at factory o Plow reinforcing rib to accommodate JRB coupler o Painted dark grey o Segmented spring loaded steel trip edges ; Forks o Rated for 19,700 lbs. minimum o 60” long forks o JRB coupler connection o Include hydraulic fork placement function o Include factory 96” long with 6” x 6” construction fork extensions, fork extensions to pin onto the forks.