Specifications include, but are not limited to: 4.0Outer Shell Material – Jackets and Trousers 4.1 Jackets and trousers shall be “Globe®” brand, or equal. _______________________ 4.2Outer shell shall be constructed of TENCATE “AGILITY™ with ENFORCE™ technology” Kevlar®/PBO/Nomex® or equal, blend material with an approximate weight of 6.6 oz. per square yard in a twill weave, or equal. _______________________ 4.3Shell material shall be treated with SST™ (SUPER SHELLTITE), or equal, water repellent finish that also enhances abrasion resistance. _______________________ 4.4Color of garments shall be light gold. _______________________ 5.0 Thermal Insulating Liner – Jacket and Trousers5.1Thermal liner shall be constructed of “Caldura® Elite SL2”, or equal. _______________________ 5.2Thermal liner shall have one layer of 1.5 oz. and one layer of 2.3 oz.per square yard E-89 spunlaced Nomex®/Kevlar®, or equal, aramid blend, minimum. _______________________ 5.3Thermal liner shall be quilt stitched to a Kelvar® filament and FR rayon/para-aramid/nylon inherently wicking Caldura® face cloth, o 5.0 Thermal Insulating Liner – Jacket and Trousers: (Continued)5.4Thermal liner shall have a minimum of one pocket, approximately 8”X 10 1/2”, constructed of thermal liner over-edged and lined with moisture barrier material, minimum. Pocket shall be affixed to the inside of the jacket thermal liner on the left side by means of a single needle stitch, or equal. _______________________ 5.5Thermal liner shall be bound around its perimeter with Bias-Cut Neoprene coated cotton/polyester binding, or equal. _______________________ 5.6Thermal liner shall be attached to the moisture barrier.