Specifications include, but are not limited to: Ticket Counters: 1) Grease bearings at drive spool, idler, head spool, tail spool and take-up spool 2) Inspect belts for tears, loose lacing and proper tracking 3) Inspect photo eyes for alignment and mounting 4) Check all gearbox oil levels and fill as needed 5) Inspect power turns for loose or noisy rollers 6) Inspect roll-up doors for damage, guards in place, and proper operation Baggage Claim: 1) Inspect roll-up doors for damage, guards in place, and proper operation 2) Remove conveyor access cover and check the following: a. Inspect wear rails for excessive wear b. Lube drive chains c. Grease drive shaft bearings d. Run system with cover off and check missing guide rollers and casters e. Re-install cover 3) Check gearboxes and motors for excessive movement and correct oil level. Correct deficiencies 4) Inspect unit in operation looking for jumping flights and missing or damaged sheet metal 5) Remove debris from under exposed sections of conveyor 6) Check photo eyes for alignment and mounting.