Specifications include, but are not limited to: Complete with 20 HP 440‐3‐60 motor. Frequency drive on spindle motor for adjusting spindle RPM’s. Three tool adjustable cutter head for OD, ID, and facing of pipe 1” to 8” diameter with replaceable carbide inserts. Standard tooling produces 37 ½ degree OD bevel and 60-degree ID bevel. Sliding stop for locating pipe in vise. Integral coolant system with large chip drawer. Hydraulic power unit & parts and Instructional manual Skidded and wrapped for shipment. • Machine Diameter Range – 1” – 8 5/8”OD • Pipe Sizes – 1” to 8” • Typical Wall Thickness – 4” Pipe – SCH 160 / 6” Pipe – SCH 120 / 8” Pipe – SCH 80 • Horsepower (Std) – 20 HP • Voltage/Amp – 440 VAC – 3 Phase – 60 Hz – 40Amp • Standard RPM Range – 150‐600RPM • Pneumatic Requirement – 1 CFM @ 90 PSI • Clamping –Hydraulic • Spindle Feed –Hydraulic • Feed Rate – Adjustable • Spindle Stroke – 6” • Coolant – Standard • Pipe Stop (Sliding Stop) –Standard • Type of Head (STD) – Three Tool ID, OD,Face • Physical Size – 37” W x 51” D x 68”H • Approximate Weight – 3,500 pounds