Specifications include, but are not limited to: Furnish and apply 6” thermoplastic striping on asphalt pavement and Durable Type 1 tape for 6 inch lines on concrete surfaces to the sections of roadway provided in this Contract. This Contract is for the installation of centerlines, lane lines, edgelines, ramp lines, dotted lines and gore markings only. Special markings such as stop bars, crosswalks, cross‐hatching, railroad markings, etc. are not to be installed under this Contract. Installation of Spray Applied Thermoplastic 6”. Install according to Special Note for Spray Applied Thermoplastic Pavement Marking Materials and according to Section 714 of the Standard Specifications. Contrary to section 714, existing stripe on asphalt will not be removed prior to installation of spray thermoplastic stripe. Installation of Durable Type 1 Tape 6”. Install according to manufacturer’s instructions and Section 714 of the Standard Specifications. The quantities estimated for this project are to be used on concrete surfaces only. Waterblast existing stripe before installation of Type 1 tape, this work is incidental to the bid item 6556 PAVE STRIPING‐DUR TY 1‐6 IN W and 6557 PAVE STRIPING‐DUR TY 1‐6 IN Y.