Specifications include, but are not limited to: 2.1 Engine: Air cooled, two cylinder, overhead valve design having a minimum displacement of 1746 cc. Engine shall have sequential port fuel injection and an engine idle temperature management system. 2.2 Clutch/Transmission: Hydraulically actuated wet multi-disk clutch. Minimum of six forward gear ratios. 2.3 Brakes: Anti-Lock brake system shall link front and rear brakes at speeds above 25 MPH.. 2.4 Lighting: Headlight shall be LED. 2.5 Windshield: Polycarbonate, breakaway design. 2.6 Saddlebags: Factory installed, water resistant law enforcement type injection molded, approximately 2000 cubic inches of storage space per bag, with one touch latches and saddlebag guard rails. Tour-Pak mounting adapter plate (53196-09) shall be provided and installed.