Specifications include, but are not limited to: 2.5" PRESSURE GAUGE The discharge shall be equipped with 2.5" Class 1 gauge. The gauge shall be fully filled with pulse and vibration dampening Interlube to lubricate the internal mechanisms to prevent lens condensation and to ensure proper operation to minus 40 degrees F. The case shall be temperature compensated with an internal breathing diaphragm to permit fully filled cases and to allow a rigid lens with a distortion free viewing area. To prevent internal freezing, and to keep contaminants from entering the gauge, the stem and Bourdon tube shall be filled with low temperature oil and be sealed from the water system using an isolating diaphragm located in the stem. A bright metal bezel shall be supplied for resistance to corrosion and to protect the lens and case from damage. The gauge shall be mounted adjacent to the corresponding water outlet. THREAD TERMINATION The above shall terminate with National Standard Threads. DISCHARGE #3 - RIGHT The discharge in position #3 on the right side of the apparatus shall include the following features. A 3" discharge shall be provided on the right side of the apparatus. VALVE, SLOW CLOSE The valve shall be an Akron slow close type HeavyDuty swing out 8000 series brass body with flow optimizing stainless steel ball, and dual polymer seats. The valve shall be capable of dual directional flow while incorporating a selflocking ball feature using an automatic friction lock design and specially designed flow optimizing stainless steel ball. The valve shall not require the lubrication of seats or any other internal waterway parts, and be capable of swinging out of the waterway for maintenance by the removal of six bolts.