Specifications include, but are not limited to: 15 FT Flex Wing Rotary Cutter Key Specs Cutting widthApprox 4.6 m15 ft Cutting capacity (diameter)Approx 50.8 mm2 in Tractor PTO HP Range37 kW50 hp Transport widthApprox 9.1 ft (2.8m) at wing wheels Deck Thickness-upper-lower11 gauge - 3 mm 0.12 in. Shirt Thickness3 gauge - 6 mm 0.24 in. Approx. weight Approx 2049 kg4519 lb Drivelines-Size-MainCV ASAE Category 4, splined telescoping profiles Blade tip speed-540 rpm-1000 rpm87.8 m/s288 fps Warranty Gear boxesFive years Capacity Cutting widthApprox 4.6 m15 ft Cutting heightApprox 25.4-406.4 mm1-16 in. Cutting capacity (diameter)Approx 50.8 mm2 in. Cutting chamber depthApprox 254 mm10 in. Tractor Compatibility Tractor PTO HP range37 kW50 hp Tractor PTO540 rpm Hitch Type Standard self-level hitch clevis with 57.2-cm (22.5-in.) narrow-profile width Jackstand Mechanical Jackstand in base for all machines. Hydraulically operated height, stays vertical while raising/lowering. Dimensions Transport widthApprox 9.1 ft (2.8 m) at wing wheels Overall widthApprox 4.7 m15.4 ft Overall lengthApprox 5.3 m17.3 ft Deck shapeEasy-clean dome-shaped top deck Deck typeSingle dome deck Deck thickness11 gauge - 3 mm0.12 in. Shirt thickness 3 gauge - 6 mm0.24 in. HingesIntermittent cast steel segments - greaseable single 2.5-cm (1-in.) diameter full-length hinge pin Approx. weight1623 kg3580 lb Drivelines SizeMain CV ASAE Category 4, splined telescoping profiles Connecting ASAE Category 4, splined telescoping profiles Protection Connection No-seize, slip-clutch driveline Gearcases HP rating Transfer Continuous: 186 kW250 hp Peak: 224 kW300 hp Center Continuous: 56 kW75 hp Peak: 75 kW100 hp Outer Continuous: 56 kW75 hp Peak: 75 kW100 hp Blades ThicknessApprox 13 mm0.4 in. WidthApprox 102 mm4 in. TypeSuction Overlap152 mm6 in. Blade tip speed540 RPM86.6 m/s284.1 fps Blade holder Type Round stump jumper for maximum protection for blade carrier against obstruction damage Hydraulics Wing lift Simultaneous Wing flexFor transport: Upward 90 degree (angle) Working angles: upward 45 degree (angle) downward 22 degree (angle)